Industry News

There's many common mistakes in large 3D printing model design. Please check below:

3D printers are not like traditional manufacturing machines by cutting or moulding to create objects. The method of forming physical objects through layers of accumulation expands the scope of the digital concept from a physical point of view. For the shape design that requires precise internal recesses or interlocking parts, 3D printers are the preferred processing equipment, which can implement such designs in the physical world. The following is a similar way to describe people from various industries with different backgrounds and professional skills. 3D printing helps them reduce major cost, time and complexity barriers. Let's take a look at the advantages of 3D printing machine.

3D printing can perfectly combine technology and materials. Some special-shaped and complex structures in personalized products, according to traditional manufacturing methods, require multiple parts to be cast and then combined, which takes a long time and is costly. And 3D printing can be done in one step, shorten the production cycle, and reduce the cost of personalized pursuit.

The application of 3d printing in car printing.

Describing the FDM 3D Printer's development and for large-size

The huge problem with the existing FDM 3D printer enclosure is that it has single function, cannot maintain a constant temperature, and increases the types of printing materials. The printing accuracy is reduced, the efficiency is low, the success rate is low, and the raw material waste is serious. Currently, there are 3D printer thermostat enclosure but most of them are only used in high-end instruments, which are not common on ordinary printers, and such printers are expensive and not suitable for popularization in 3D printers.

3D FDM printing filament TPU (Thermoplastic Urethane thermoplastic polyurethane elastomer) is a mature environmentally friendly material between rubber and plastic. Its products are currently widely used in shoe manufacturing, medical and health, electronic appliances, industry and sports, etc. . So, what characteristics does TPU material have that other plastic materials can't match?

Regarding 3D printing machine, many people have learned a lot about dry goods, but they lack some practical skills. I often print out the failed model, which is time-consuming and labor-intensive, hard work, and the model that has been changed from left to right is horrible in the end. Here, I will summarize the previous knowledge for you, and help you to play a little help in the printing process. Today, I want to explain some questions about 3D printer work:

Nowadays, with the using of 3D printer, there's problem about the machine maintenance.

In 3D printing of 3D printing machine, each layer is constructed on the basis of the previous layer. Therefore, there needs to be a balance between the basic strength and the amount of consumables. If the foundation is not strong enough, there will be holes and gaps between layers. Especially in the corners where the size changes (for example, you print a 20mm square on a 40mm platform). When printing to a smaller size, you need to ensure that there is enough foundation to support the 20mm square side wall. There are usually several reasons for the weak foundation.